Design of the Digital I/O Pad Buffer for Mixed-Voltage Application

Said El Mouzouade, Karim El khadiri, Zakia Lakhliai, Ahmed Tahiri

Abstract


A new circuit design of digital bidirectional input/output (I/O) pad buffer for mixed voltage is presented. The digictal bidirectional I/0 buffer is designed to avoid reflections by matching the output impedance to the 50 ohms of the transmission line and having overshoots and undershoots below 300mV by increasing the output impedance. The digital bidirectional I/O pad buffer provides minimum delays between input and output and minimum rising and falling times. The proposed digital bidirectional I/O pad buffer was designed, simulated and layouted in Cadence using in TSMC  0.18um CMOS process with a linear resistive element electrically connected at an I/O pad for limiting a processed data I/O signal. The output rising time and falling time are 0.42 ns and 0.93 ns with 3pF load respectively. The final chip area is only 5 um2 .

Keywords


Mixed-voltage; Digital I/O Pad; Bidirection I/O

Full Text: PDF

Refbacks

  • There are currently no refbacks.


 

Indonesian Journal of Electrical Engineering and Informatics (IJEEI)
ISSN 2089-3272

Creative Commons Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

web analytics
View IJEEI Stats

Error. Page cannot be displayed. Please contact your service provider for more details. (2)