Implementing Pseudo-Random Control in Boost Converter: An Effective Approach for Mitigating Conducted Electromagnetic Emissions

Zakaria M'barki, Youssef Mejdoub, Kaoutar Senhaji Rhazi, Khalid Sabhi

Abstract


Currently, pulse width modulation (PWM) is a prevalent technique in the field of DC-DC converter control. Its primary objectives encompass maintaining the regulation of the converter's output voltage and improving the load's performance by mitigating the adverse effects caused by harmonic distortions. Unfortunately, the utilization of PWM is associated with significant levels of residual harmonics, characterized by notable amplitudes and frequencies, which have the potential to induce mechanical vibrations, acoustic disturbances, and electromagnetic interference (EMI).To address this challenge, a method known as pseudo-random modulation (PRM) has been developed. In comparison to traditional PWM, PRM offers ease of implementation and high efficacy in EMI mitigation. PRM achieves this by distributing harmonic power across a broader frequency range, thereby reducing the prominence of high-amplitude harmonics at specific frequencies. Within the context of Spread Spectrum Modulation (SSM), this study extensively explores diverse converter topologies and proposes an innovative hardware implementation using the cost-effective Atmega328p microcontroller. Furthermore, the study scrutinizes the consequences of implementing this randomized control strategy to reduce electromagnetic emissions from a Boost converter, a well-recognized source of significant interference in its operational environment. Ultimately, the aim is to evaluate the effectiveness of these applied methodologies in achieving the maximum dispersion of the power spectrum, thereby enhancing overall electromagnetic compatibility.

Keywords


Boost converter; Conducted EMI; Pseudo Random Modulation; Arduino Uno

References


Power Converters in Power Electronics. Basel, Switzerland: MDPI - Multidisciplinary Digital Publishing Institute, 2020.

M. Al Sakka, J. Van Mierlo, and H. Gualous, "DC/DC Converters for Electric Vehicles," 2011.

K.M.Muttaqi, M.E.Haque, Electromagnetic Interference Generated from Fast Switching Power Electronic devices International Journal of Innovations in Energy Systems and Power, Vol. 3, no. 1 (April 2008).

M’barki, Z., Rhazi, K.: Optimization of electromagnetic interference conducted in a devolver chopper. In: Hajji, B., Mellit, A., Marco Tina, G., Rabhi, A., Launay, J., Naimi, S. (eds.) Proceedings of the 2nd International Conference on Electronic Engineering and Renewable Energy Systems, ICEERE 2020. LNEE, vol. 681, pp. 523–529. Springer, Singapore (2021). https://doi.org/10.1007/978-981-15-6259-4_55.

Y. Zhang, H. Li, and Y. Shi, "Electromagnetic Interference Filter Design for a 100 kW Silicon Carbide Photovoltaic Inverter Without Switching Harmonics Filter," IEEE Transactions on Industrial Electronics, vol. 69, no. 7, pp. 6925-6934, 2022, doi: 10.1109/TIE.2021.3095806.

J. L. Kotny, T. Duquesne, and N. Idir, "Design of EMI filters for DC-DC converter," in 2010 IEEE Vehicle Power and Propulsion Conference, 1-3 Sept. 2010, pp. 1-6.

W. Chen, W. Zhang, X. Yang, Z. Sheng, and Z. Wang, "An Experimental Study of Common- and Differential-Mode Active EMI Filter Compensation Characteristics," IEEE Transactions on Electromagnetic Compatibility, vol. 51, no. 3, pp. 683-691, 2009.

A. Farhadi and A. Jalilian, "Modeling and Simulation of Electromagnetic Conducted Emission Due to Power Electronics Converters," in 2006 International Conference on Power Electronic, Drives and Energy Systems, 12-15 Dec. 2006, pp. 1-6, doi: 10.1109/PEDES.2006.344331.

B. Nassireddine, B. Abdelber, C. Nawel, D. Abdelkader, and B. Soufyane, "Conducted EMI Prediction in DC/DC Converter Using Frequency Domain Approach," in 2018 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), 28-31 Oct. 2018, pp. 1-6, doi: 10.1109/CISTEM.2018.8613398.

Z. Li, T. Zhang, Y. Cao, S. Yang, S. Kavuma, and H. Feng, "Conducted EMI Prediction and Mitigation Strategy Based on Transfer Function for a High-Low Voltage DC-DC Converter in Electric Vehicle," Energies, vol. 11, p. 1028, 04/24 2018, doi: 10.3390/en11051028.

M’barki, Z., Rhazi, K., Mejdoub, Y, "A proposal of structure and control overcoming conducted electromagnetic interference in a buck converter," Int. J. Power Electron. Drive Syst. 13, 380-389 (2022). https://doi.org/10.11591/ijpeds.

v13.i1.pp380-389.

J. T and S. Perumal, "Comprehensive Investigation on Harmonic Spreading Effects of SPWM and RPWM Methods," European Journal of Scientific Research, vol. 103, pp. 296-303, 06/01 2013.

G. Marsala and A. Ragusa, Spread spectrum in random PWM DC-DC converters by PSO&GA optimized randomness levels. 2017, pp. 1-6.

Y. Lim, S. Wi, J. Kim, and Y. Jung, "A Pseudorandom Carrier Modulation Scheme," IEEE Transactions on Power Electronics, vol. 25, no. 4, pp. 797-805, 2010.

A. Boudouda, N. Boudjerda, A. Bouzida, and A. Aibeche, "Dual randomized pulse width modulation technique for buck converter fed by photovoltaic source," Revue Roumaine des Sciences Techniques - Serie Électrotechnique et Énergétique, vol. 63, pp. 289–294, 12/15 2018.

Z. M’barki, K. S. Rhazi, and Y. Mejdoub, "Practical Implementation of Pseudo-random Control in Step-Down Choppers and Its Efficiency in Mitigating Conducted Electromagnetic Emissions," in Artificial Intelligence and Smart Environment, Cham, Y. Farhaoui, A. Rocha, Z. Brahmia, and B. Bhushab, Eds., 2023// 2023: Springer International Publishing, pp. 674-682.

C. Dhia and S. Lassaad, "Implementation of different randomized PWM schemes using Atmega328p microcontroller for EMI reduction in boost converter," Electrical Engineering, vol. 102, 06/01 2020, doi: 10.1007/s00202-020-00934-7.

L. Fang Lin and Y. Hong, "Investigation of EMI, EMS and EMC in power DC/DC converters," in The Fifth International Conference on Power Electronics and Drive Systems, vol.1, pp. 572-577, 2003.

R. Boopathi, R. Jayanthi, and M. Ansari, "Power quality improvement in wind energy conversion system using hybrid SVPWM inverter control technique for THD reduction," International Journal of Dynamics and Control, vol. 8, 06/01 2020, doi: 10.1007/s40435-019-00556-3.

R. M. Pindoriya, B. S. Rajpurohit, and R. Kumar, "A Novel Application of Harmonics Spread Spectrum Technique for Acoustic Noise and Vibration Reduction of PMSM Drive," (in English), IEEE Access, Article vol. 8, pp. 103273-103284-103284, 01/01/ 2020, doi: 10.1109/ACCESS.2020.2999336.

J. Yousaf, M. Faisal, W. Nah, M. Ghazal, R. Sarmad Mahmmod, and H. Rmili, "Effects of Random Switching Schemes on the EMI Levels of Conventional and Interleaved Buck Converters for Mobile Devices," Electronics (2079-9292), vol. 11, no. 3, pp. 306-N.PAG, 02// 2022, doi: 10.3390/electronics11030306.

J. T and S. Perumal, "Comprehensive Investigation on Harmonic Spreading Effects of SPWM and RPWM Methods," European Journal of Scientific Research, vol. 103, pp. 296-303, 06/01 2013.

P. Madasamy et al., "Hybrid Multicarrier Random Space Vector PWM for the Mitigation of Acoustic Noise," Electronics, vol. 10, no. 12, doi: 10.3390/electronics10121483.

M’barki, Z., Rhazi, K., Mejdoub, Y.: A novel fuzzy logic control for a zero current switching-based buck converter to mitigate conducted electromagnetic interference. Int. J. Electr. Comput. Eng. (IJECE) 13(2), 1423–1436 (2023).

K. Khotimah, Y. Chia, M. Sudrajat, V. Permatasari, E. Trivida, and T. Wijarnoko, "Conducted emission investigation of infant incubator heating control mode," International Journal of Electrical and Computer Engineering (IJECE), vol. 12, p. 5900, 12/01 2022, doi: 10.11591/ijece.v12i6.pp5900-5910.


Full Text: PDF

Refbacks

  • There are currently no refbacks.


 

Indonesian Journal of Electrical Engineering and Informatics (IJEEI)
ISSN 2089-3272

Creative Commons Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

web analytics
View IJEEI Stats

Error. Page cannot be displayed. Please contact your service provider for more details. (2)