Angularly Stable, Transparent and Flexible Modified Octagonal Shaped Frequency Selective Surface (FSS) for Sub-GHz 5G Applications

DOI: https://doi.org/10.52549/ijeei.v13i3.6747
Published: 15-08-2025 • Issue: Vol. 13 No. 3: September 2025 • Section: Regular paper

Abstract

This paper offers a newly size-reduced Frequency Selective Surface (FSS) featuring band-stop behavior at 4.2 GHz. This developed FSS includes a mushroom-shaped arm with an octagonal patch. The patch is extensively adjusted by incorporating further mushroom-shaped arms, leading to a lower resonance and wider bandwidth. The designed FSS is made up of just a 11 × 11 mm unit cell on a flexible acrylic substrate that is 1 mm thick. The proposed FSS had a 1 GHz bandwidth with a centre resonance frequency of 4.2 GHz. Due to the distinct polarization behavior of this FSS, the Transverse Magnetic (TM) and Transverse Electric (TE) modes are unique and have a steady angular property up to 45º. Measurements of S-parameters for TE and TM polarizations have been validated experimentally over the 2–8 GHz frequency spectrum for both normal and oblique incident angles up to 45°. Excellent agreement between the measured and simulated data is demonstrated, verifying the FSS performance with a frequency variation of less than 3% and preserving constant band-stop properties across all measured orientations. It may be appropriate for incorporation into applicable clothes in a variety of areas because of its simplicity and ease of fabrication.

References

F. Yang and Y. Rahmat-Samii, Electromagnetic Band Gap Structures in Antenna Engineering. Cambridge, U.K.: Cambridge Univ. Press, 2009.

Q. Bai, K. L. Ford, and R. J. Langley, "Switchable electromagnetic bandgap surface wave antenna," Int. J. Antennas Propag., vol. 2014, Art. ID 693852, pp. 1–7, 2014.

N. Kushwaha and R. Kumar, "Study of different shape Electromagnetic Bandgap (EBG) structures for single and dual band applications," J. Microw. Optoelectron. Electromagn. Appl., vol. 13, pp. 16–30, 2014.

C. Huang, C. Ji, X. Wu, J. Song, and X. Luo, "Combining FSS and EBG surfaces for high-efficiency transmission and low-scattering properties," IEEE Trans. Antennas Propag., vol. 66, no. 3, pp. 1628–1632, Mar. 2018.

G. Gao, S. Wang, R. Zhang, C. Yang, and B. Hu, "Flexible FSSâ€backed PIFA based on conductive textile and PDMS for wearable applications," Microw. Opt. Technol. Lett., vol. 62, no. 4, pp. 1733–1741, Apr. 2020.

A.Y. Ashyap et al., "Highly efficient wearable CPW antenna enabled by FSS-FSS structure for medical body area network applications," IEEE Access, vol. 6, pp. 77529–77541, 2018.

B. Mustafa and T. Rajendran, "Wearable multilayer patch antenna with electromagnetic band gap structure for public safety systems," IETE J. Res., vol. 68, no. 4, pp. 2979–2988, 2022.

Y. J. Lee, J. Yeo, R. Mittra, and W. S. Park, "Design of a highâ€directivity electromagnetic band gap (FSS) resonator antenna using a frequencyâ€selective surface (FSS) superstrate," Microw. Opt. Technol. Lett., vol. 43, no. 6, pp. 462–467, Jun. 2004.

S. Chaimool, C. Rakluea, and P. Akkaraekthalin, "Compact wideband microstrip thinned array antenna using FSS superstrate," AEU-Int. J. Electron. Commun., vol. 66, no. 1, pp. 49–53, 2012.

A.A. Althuwayb et al., "Metasurface-inspired flexible wearable MIMO antenna array for wireless body area network applications and biomedical telemetry devices," IEEE Access, vol. 11, pp. 1039–1056, 2023.

N. P. Kulkarni, N. B. Bahadure, P. D. Patil, and J. S. Kulkarni, "Flexible interconnected 4-port MIMO antenna for sub-6 GHz 5G and X band applications," AEU-Int. J. Electron. Commun., vol. 152, p. 154243, 2022.

M. D. Geyikoglu, "A novel UWB flexible antenna with dual notch bands for wearable biomedical devices," Analog Integr. Circ. Sig. Process., vol. 114, pp. 439–450, 2023.

M. Al-Hasan et al., "Metamaterial inspired electromagnetic bandgap filter for ultra-wide stopband screening devices of electromagnetic interference," Sci. Rep., vol. 13, no. 1, p. 13347, 2023.

T. H. Dam, M. T. Le, Q. C. Nguyen, and T. T. Nguyen, "Dual-band metamaterial-based FSS antenna for wearable wireless devices," Int. J. RF Microw. Comput. Aided Eng., vol. 2023, Art. ID 2232674, pp. 1–11, 2023.

K. S. Parvathi and S. R. Gupta, "Novel dual-band FSS structure to reduce mutual coupling of air gap-based MIMO antenna for 5G application," AEU-Int. J. Electron. Commun., vol. 138, p. 153902, 2021.

S. Karamzadeh and V. Rafiei, "Dual-band antenna modification by using dual band FSS structure for WLAN/WiMAX applications," J. Instrum., vol. 15, no. 4, p. P04025, 2020.

T. Tian et al., "Flexible and reconfigurable frequency selective surface with wide angular stability fabricated with additive manufacturing procedure," IEEE Antennas Wireless Propag. Lett., vol. 19, no. 12, pp. 2428–2432, Dec. 2020.

A. Dewani, S. G. O’Keefe, D. V. Thiel, and A. Galehdar, "Optically transparent frequency selective surfaces on flexible thin plastic substrates," AIP Adv., vol. 5, no. 2, 2015.

H. Zhu, S. Jin, and J. Shao, "Transparent and angular stably miniaturized frequency selective surface for tri-band GSM shielding," IEICE Electron. Exp., vol. 21, no. 22, p. 20240485, 2024.

N. Prasad et al., "Flexible metamaterial-based frequency selective surface with square and circular split ring resonators combinations for X-band applications," Mathematics, vol. 11, no. 4, p. 800, 2023.

M. Bilal et al., "Miniaturized and flexible FSS-based EM shields for conformal applications," IEEE Trans. Electromagn. Compat., vol. 62, no. 5, pp. 1703–1710, 2020.

M. Qu, B. Li, S. Sun, and S. Li, "Angularly stable bandpass frequency selective surface based on metasurface," IEEE Access, vol. 8, pp. 41684–41689, 2020.

M. Idrees, Y. He, S. Ullah, and S. W. Wong, "A dual-band polarization-insensitive frequency selective surface for electromagnetic shielding applications," Sensors, vol. 24, no. 11, p. 3333, 2024.

T. S. Kumar and K. J. Vinoy, "A miniaturized angularly stable FSS for shielding GSM 0.9, 1.8, and Wi-Fi 2.4 GHz bands," IEEE Trans. Electromagn. Compat., vol. 63, no. 5, pp. 1605–1608, 2021.

J. Garg, S. Yadav, and M. M. Sharma, "A novel miniaturized loop-based angularly stable and polarization-independent multiband bandpass FSS structure for Wi-Max and WLAN applications," SÄdhanÄ, vol. 48, no. 1, p. 14, 2023.

How to Cite

[1]
G. R. Kumar, S. S, D. S, L. S, M. M. A, and L. S, “Angularly Stable, Transparent and Flexible Modified Octagonal Shaped Frequency Selective Surface (FSS) for Sub-GHz 5G Applications”, IJEEI, vol. 13, no. 3, pp. 548–557, Aug. 2025, doi: 10.52549/ijeei.v13i3.6747.