An Interconnected Wind Driven SEIG System Using SVPWM Controlled TL Z-Source Inverter Strategy for Off-Shore WECS

DOI: https://doi.org/10.52549/ijeei.v1i3.89
Published: 01-09-2013 • Issue: Vol. 1 No. 3: September 2013 • Section: Electrical_(Power)

Abstract

This paper discuss about  the interconnection of wind driven SEIG for drive applications by using TL Z-source inverter strategy .TL Z-source consists of two coupled inductors having turns ratio γTL and four diodes are used . The wind energy system uses a two Self Excited Induction generator (SEIG) connected parallel in order to increase the reliability. The proposed system components like wind turbine SEIG, rectifier, SVM Controlled TL Z-source inverter, are modeled by matlab Simulink. The maximum power can be extracted and supplied to the load efficiently by using TL Z-source inverter with a proper value of modulation index. The simulation output is analysed experimentally using 500 W experimental setup.

How to Cite

[1]
A. S. CS, V. Raghavendrarajan, R. H. Kumar, and M. Sasikumar, “An Interconnected Wind Driven SEIG System Using SVPWM Controlled TL Z-Source Inverter Strategy for Off-Shore WECS”, IJEEI, vol. 1, no. 3, pp. 89–98, Sep. 2013, doi: 10.52549/ijeei.v1i3.89.