Improved Sensor Fault-Tolerant Control Technique Applied to Three-Phase Induction Motor Drive

Minh Chau Huu Nguyen, Cuong Dinh Tran

Abstract


An improved fault-tolerant control (FTC) method using mathematical functions is applied to the induction motor drive (IMD) against current sensors and speed encoder failures, which occur when the sensor is disconnected or completely damaged. The IMD with two current sensors and an encoder is speed controlled based on the field-oriented control (FOC) technique in regular operation. In this paper, an FTC unit is implemented in the FOC controller to detect and solve the sensor fault to increase the reliability of the speed control process. The measured stator currents and the feedback speed signal are integrated into the diagnosis algorithms to create a sensor fault-tolerant control function. Three diagnosis functions operating in a defined sequence are proposed for determining the health status of current and speed sensors. The FTC function performs isolation and replaces the faulty sensor signals with the proper estimated signals; then, the IMD will operate in the corresponding sensorless mode. Simulations will be performed to verify the accuracy and reliability of the proposed method under various sensor faults.

Keywords


Current sensor fault; Fault-tolerant control; Field-oriented control; Induction motor; Speed sensor fault

References


T. F. Chan and K. Shi, Applied Intelligent Control of Induction Motor Drives, 1st edition, Wiley and Sons, 2011.

A. M. Trzynadlowski, Control of Induction Motors, 1st edition, Engineering & Transportation, 2000.

T. Torres, J. Carlos, and M. A. Duarte-Mermoud. “Normalized Model Reference Adaptive Control Applied to High Starting Torque Scalar Control Scheme for Induction Motors,” Energies, vol. 15, no. 3, 2022.

K. Lee and Y. Han, “Reactive-Power-Based Robust MTPA Control for v/f Scalar-Controlled Induction Motor Drives,” IEEE Transactions on Industrial Electronics, vol. 69, no. 1, pp. 169-178, 2022.

Z. Zhang, et al., “Robust Sensorless Scalar Control of Induction Motor Drives with Torque Capability Enhancement at Low Speeds,” IEEE International Electric Machines & Drives Conference (IEMDC), pp. 1706-1710, 2019.

AN2388 Application note, “Sensor field oriented control (IFOC) of three-phase AC induction motors using ST10F276,” ST Microelectronics, Oct. 2006, pp. 54.

W. Li, et al., “Induction Motor Control System based on FOC Algorithm,” IEEE International Information Technology and Artificial Intelligence Conference (ITAIC), pp. 1544-1548, 2019.

D. L. Mon-Nzongo, T. Jin, G. Ekemb, and L. Bitjoka, “Decoupling Network of Field-Oriented Control in Variable-Frequency Drives,” IEEE Transactions on Industrial Electronics, vol. 64, no. 7, pp. 5746-5750, 2017.

M. Boukhnifer, et al., “Fault Tolerant Control to Mechanical Sensor Failures for Induction Motor Drive: A Comparative Study of Voting Algorithms,” Annual Conference of the IEEE Industrial Electronics Society, pp. 2851-2856, 2013.

J. Azzoug, Y. Pusca, R. Sahraoui, M. Ammar, A. Ameid, T. Romary, and R. Cardoso, “An Active Fault-Tolerant Control Strategy for Current Sensors Failure for Induction Motor Drives using a Single Observer for Currents Estimation and Axes Transformation,” European Journal of Electrical Engineering, vol. 23, No. 6, pp. 467-474. 2021.

K. Klimkowski and M. Dybkowski, “A Fault Tolerant Control Structure for an Induction Motor Drive System,” Automatika., vol. 57, no. 3, 2016.

D. Diallo, M. E. H. Benbouzid, and M. A. Masrur, “Special Section on Condition Monitoring and Fault Accommodation in Electric and Hybrid Propulsion Systems,” IEEE Transactions on Vehicular Technology, vol. 62, no. 3, pp. 962-964, 2013.

M. Bouakoura, N. Nait-Said, M. S. Nait-Said, and A. Belbach, “Novel speed and current sensor FDI schemes with an improved AFTC for induction motor drives,” Advances in Electrical and Electronic Engineering, vol. 16, no. 1, pp. 1-14, 2018.

T. A. Najafabadi, F. R. Salmasi, and P. Jabehdar-Maralani, “Detection and Isolation of Speed, DC-Link Voltage and Current-Sensor Faults Based on an Adaptive Observer in Induction-Motor Drives,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1662-1672, 2011.

C. Chakraborty and V. Verma, “Speed and Current Sensor Fault Detection and Isolation Technique for Induction Motor Drive Using Axes Transformation,” IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1943-1954, 2015.

F. R. Salmasi, “A Self-Healing Induction Motor Drive with Model Free Sensor Tampering and Sensor Fault Detection, Isolation, and Compensation,” IEEE Transactions on Industrial Electronics, vol. 64, no. 8, pp. 6105-6115, 2017.

C. D. Tran, P. Brandstetter, M. C. H. Nguyen, S. D. Ho, B. H. Dinh, and P. N. Pham, “A Robust Diagnosis Method for Speed Sensor Fault based on Stator Currents in The RFOC Induction Motor Drive,” International Journal of Electrical and Computer Engineering, vol. 10, no. 3, pp. 3035-3046, 2020.

C. D. Tran, M. Kuchar, M. Sobek, V. Sotola, and B. H. Dinh, “Sensor Fault Diagnosis Method Based on Rotor Slip Applied to Induction Motor Drive,” Sensors, vol. 22, no. 22, pp. 8636, 2022.

S. P. Ganjewar and Y. Pahariya, “Modified MRAS Approach for Sensorless Speed Control of Induction Motor for Reliability Improvement,” International Journal of Information Technology, vol. 14, pp. 1595–1602, 2022.

P. Brandstetter and M. Dobrovsky, “Speed estimation of induction motor using model reference adaptive system with Kalman filter,” Advances in Electrical and Electronic Engineering, vol. 11, no. 1, pp. 22-28, 2013.

M. S. Zaky, M. K. Metwaly, H. Z. Azazi, and S. A. Deraz, “A New Adaptive SMO for Speed Estimation of Sensorless Induction Motor Drives at Zero and Very Low Frequencies,” IEEE Transactions on Industrial Electronics, vol. 65, no. 9, pp. 6901-6911, 2018.

C. S. T. Dong, C. D. Tran, S. D. Ho, P. Brandstetter, and M. Kuchar, “Robust Sliding Mode Observer application in Vector Control of Induction Motor,” Elektro., pp. 1-5, 2018.

C. D. Tran, P. Brandstetter, M. H. Nguyen, S. D. Ho, P. N. Pham, and B. H. Dinh, “An Improved Current-Sensorless Method for Induction Motor Drives applying Hysteresis Current Controller,” Indonesian Journal of Electrical Engineering and Informatics (IJEEI), vol. 9, no. 1, pp. 130-140, 2021.

V. Verma, “Current Sensorless Vector Controlled Induction Motor Drive,” International Journal of Robotics and Automation (IJRA), vol. 8, no. 1, pp. 52-67, 2019.

Y. Azzoug, et al., “A Single Observer for Currents Estimation in Sensor’s Fault-Tolerant Control of Induction Motor Drives,” International Conference on Applied Automation and Industrial Diagnostics (ICAAID), pp. 1-6, 2019.

Y. Azzoug, M. Sahraoui, R. Pusca, T. Ameid, R. Romary, and A. J. M. Cardoso, “High-Performance Vector Control without AC Phase Current Sensors for Induction Motor Drives: Simulation And Real-Time Implementation,” ISA Transactions, vol. 109, pp. 295-306, 2020.

M. Adamczyk and T. Orlowska-Kowalska, “Self-Correcting Virtual Current Sensor based on the Modified Luenberger Observer for Fault-Tolerant Induction Motor Drive,” Energies, vol. 14, no. 20, pp. 6767, 2021.

Q. S. Vu, C. D. Tran, B. H. Dinh, C. S. T. Dong, H. T. Huynh, and H. X. Phan, “A Current Sensor Fault Diagnosis Method based on Phase Angle Shift Technique applying to Induction Motor Drive,” International Journal of Power Electronics and Drive Systems (IJPEDS), vol. 13, no. 3, pp. 1315-1325, 2022.


Full Text: PDF

Refbacks

  • There are currently no refbacks.


 

Indonesian Journal of Electrical Engineering and Informatics (IJEEI)
ISSN 2089-3272

Creative Commons Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

web analytics
View IJEEI Stats

Error. Page cannot be displayed. Please contact your service provider for more details. (4)